No products in the cart.
The Philodendron Birkin is a mutated plant from ‘Philodendron Rojo Congo’ Philodendron and ‘Green-Leaf’ Philodendron. They are one of the variegated plants with evergreen foliage that are most sought today by plant owners and gardeners.
Its ancestor was discovered in Brazil’s rainforest in the 15th century, this means that Philodendron plants thrive in rainforests or in other words tropical plants. Although, the variegated plant itself has only been found recently after studying the rare species of the Philodendron.
The variegated philodendron has dark green leaves with yellow or white markings. This variegated philodendron is a tropical plant with different leaf patterns.
The Philodendron Birkin can be treated as an indoor plant
The table below is the profile of the plant, as mentioned earlier.
Scientific Name: Philodendron Birkin
Plant type: Houseplant
Exposure to Sunlight: Bright indirect light exposure
Soil Type: Loosened, moist soil with a minimal amount of water (including perlite and peat moss).
Water: Medium Amount of Water
Favorable Climate: Tropical Climate
Preferable Fertilizer: Balance Liquid Fertilizer (it must have magnesium and calcium within)
Propagation: Cuttings from Stem
Toxicity Warning: Toxic to Animals
Height: 6-12 meters
Philodendron Birkin Plant Care Basics
This beauty is easy to care for. However, you need to follow a few necessary steps to maintain the beauty and good health of the plant. These are also crucial for the plant to survive and thrive.
Here are important Philodendron Birkin care tips that we need to be aware of:
Philodendron Birkin Ideal Mix
The suitable choice of soil for Philodendron Birkin is an essential factor in taking care of the plant well. The said houseplant highly prefers the loosened soil that allows a little excess water to be retained. The plant loves the ground to survive with a minimal amount of extra water for the roots to sip.
The soil can be added with perlite and peat moss to ensure that the minimal amount of excess water can be stored properly. In this way, the roots are protected by the moss from being rotten.
Perlite ensures moisture and nourishment are needed for the thriving of the plant. Meanwhile, the peat moss can retain water and provides oxygenation. Potting mix or soil mixture is also a great help for this plant to thrive. As they say, the best soil is the best spoil 😉
The water requirement of the Philodendron Birkin plant is a moderate amount of water only. The plant should not be overwatered or underwatered. These factors can cause complications to the growth and nourishment of the plant. Overwatering also turns those green lushes into yellow leaves.
Doing such a thing consistently would end up having brown leaves. Avoid overwatering to help the glossy leaves.
When the plant still has its moisture, do not water the plant.
Ideal Lighting for Philodendron Birkin
The Philodendron Birkin light requirements should be bright indirect light, enough for the plant to create its food. Like in its natural habitat, the plant doesn’t need to be fully exposed to the sun because the forest has protected it well from scorching.
Avoid the plant from direct sunlight exposure or being fully shaded all the time, as these two factors can significantly cause harm to the plant’s growth. The plant requires the right time for receiving sunlight and the right time for being shaded.
Direct sunlight can wilt the plant, while a fully shaded area can make the plant droopy. On the other hand, indirect sunlight encourages the plant’s green leaves to not just become a beautiful plants but to have stunning foliage.
When you have decided to install grow light inside your home, the plant must be radiated for 12 hours only. Overexposure can harm or kill the plant. Grow light is recommended for gardeners who cannot trust the temperature and light exposure outside.
Philodendron Birkin Temperature Requirement
Philodendron Birkin, as mentioned earlier, is a tropical plant. Meaning, they prefer a humid and warm area where they best fully bloom and healthily grow. The plant is said to tolerate a room temperature of 13 degrees Celsius to 30 degrees Celsius. Its temperature requirement should be followed for the plant to grow well.
Temperature exceeding 40 degrees Celsius can scorch up the plant or dry the soil’s moisture quickly. On the other hand, the temperature of 12 degrees Celsius and below can freeze the plant. Be sure to place the plant indoors when the temperature exceeds its accepted or tolerated warmth.
If you decided to put the plant inside your home, be sure that the room is warm enough to sustain the required temperature and maintain the soil’s moisture. It is said that during colder temperatures, the plant will show signs of minimal growth. Spring and summer months would be the best way if you want to expose your Birkin outdoors.
Philodendron Birkin Humidity Requirement
As previously mentioned, the said plant is a tropical plant. The plant loves to have damp soil. The plant requires a certain amount of humidity levels.
There is no exact standard of humidity for the plant to survive and thrive. However, the more damped the soil, the plant will thrive healthy and beautiful. The Birkin Philodendron loves a humid environment maintaining it as a healthy plant. Make sure that the soil is moist all the time, with no overwatering to avoid yellow leaves’ appearance.
To increase the humidity level for the plant’s benefit, you are free to use any humidifier already in your home or friendly to the budget. Another way to increase their humidity levels is to put a pebble tray filled with water.
Philodendron Birkin, as mentioned earlier, should be fertilized to enhance the beauty of its leaves and keep the plant healthy.
The preferable choice of fertilizer for the plant is the balanced liquid fertilizer. The said fertilizer should have the vital nutrients within it, such as the magnesium and calcium that have something to do with the plant’s nourishment.
The plant is ideally to be fertilized once every week. Avoid fertilizing it too much or too many times as this will cause abnormality to the plant’s growth and nourishment. Summer and spring are the plant’s growing seasons.
During winter, the plant can only be fertilized once a month. Although, this is highly discouraged when it was placed outdoors.
Philodendron Birkin Propagation
One thing to learn about Birkin care is the way it should be propagated. It can only be propagated through stem cutting. It is preferable to propagate it during the months of March and April. Our favorite spring and summer months.
There are various ways on how to propagate the said houseplant. Although, the highly recommended course is through stem cuttings from the plant. There are two methods on how to do the Birkin stem cutting propagation: by marcotting or by water.
These are the following procedures of the two methods for stem cuttings:
- Take a knife that can wound the stem of the plant. Cut the stem the length of two inches, and the cut should be in the center of the stem cut.
- In the wound you have created, insert it with a toothpick to hold the damage open.
- Apply a handful of damped sphagnum peat moss around the wounded area. Always check the dampness of the peat moss, and please make sure that it should be dumped all the time. Dampen the moss once again when it starts to dry up. Bear in mind that you only need to dampen the peat moss and not fully immerse it with water.
- Tie the peat moss around using a string. This will make the wounded stem stick on the dampened bog moss.
- To tightly cover and protect the damped moss peat and the wounded stem, wrap it with a polyurethane film. The film should be enough to hold both the wounded stem and the bog moss. Afterward, you can secure the film’s hold using duct tape.
- The roots of the wounded stem will indeed begin to outgrow on the peat moss after two weeks. When this became possible, remove the injured stem from its mother plant below the peat moss.
- Carefully remove the polyurethane film from the bog moss. The roots of the Philodendron Birkin hurt when it will be removed, leading to plant death. These roots are essential for the growth of the new plant, and they should not be removed with the film.
- Cut the stem for about the length of three to six inches using the pruning shears. Ensure that the stem’s critical parts, such as the leaves or the leaf node, should be intact.
- Pull out the leaves from the stem cuttings.
- In a jar or any container, fill it with water and chlorine. The solution should be left overnight.
- The following day, place the cuts into the jar. Make sure that the bottom part where you pull out the leaves should be immersed in the water.
- Change the water every two days; this will keep the cuts clean and away from bacterial infection.
- After a week or two, roots start to appear on the stem cutting. You can either plant it directly or let it grow for an inch and placed it in a temporary pot.
Philodendron Birkin Growth Zone
The Philodendron Birkin is a fast-growing plant that grows for about 1.5 to 3 feet. When planted outside the house or within the garden, the plant can grow up to 6-12 meters. Although, the growth may depend on the basic requirements it receives.
Potting Philodendron Birkin
The Philodendron plant pot should have drainage holes and a highly preferred potting mix that retains moisture. This will do a great help before we repot them.
The growth rate of the plant, as mentioned earlier, assesses the need for the plant to be repotted. You have to check the status of the plant and how it thrives before we jump into repotting them.
One indication that the plant needs repotting is when the roots have reached the bottom part of the pot. This means that it is high time for the plant to be repotted to another pot where it was more significant than the former.
Ensure that the pot should be more significant than the former to prevent the roots from being strangled within the pot.
For other varieties of Philodendrons, a year is sufficient for repotting. Since the essential requirements it receives may vary depending on where it was planted, some cases may require the plant to be repotted after two years.
Philodendron Birkin Varieties and Similar Plants
There are other houseplants of Philodendron Birkin plants. There are approximately 100 known Philodendron plants and their variegation. These Philodendron Birkin plants are classified into two: vine and non-vine types. Here are the other houseplants from Philodendron Birkin plants varieties: These plants and their variegation can both thrive outdoor or as indoor plants.
This Philodendron plant is known for having heart-shaped leaves. Thus, gaining the nickname “sweetheart.” This Philodendron variety is easy to care for.
Another Philodendron variety with green, white, or even cream colors. The plant also has heart-shaped leaves.
AnotherPphilodendron variety is eye-appealing to gardeners. The plant can grow as blooming and big whenever it was carefully grown.
The Philodendron variety with a bold, gorgeous green color was also considered a hybrid variety. This Philodendron variety can be suitable as an outdoor plant rather than placing it indoors.
Philodendron White Knight
This Philodendron variety has variegated leaves with a mixture of colors of spotless white and brilliant green. This exceptional plant is gorgeous and ideally the best plant to be placed in every walkway.
Philodendron Birkin Diseases & Pests
One of the plant’s antagonists was the spider mites. These creepy mites are reddish-brown in color and super small in their size.
They aim to sip all the plant’s nutrients by biting the leaves and leaving light dot-shaped marks.
When the mites are constantly doing this process, the leaves shall dry up and will fall away.
You are pruning the leaves and areas that the said insect has infested can rid of the spider mites. To further remove the infested areas or protect the plant, you may use insecticidal soap to clean the plant.
Thrips are another pest that will likely infest the Birkin plant. Like the spider mites, thrips are also known for sipping all the nutrients of the plants.
The thrips are known to know to be tiny in nature and have wings. Due to their size, it is tough to look for them unless you focus on getting them out from the plant. The said bug is black or a yellow pale in color.
They aim to make the plant weak and pale until the plant’s demise.
Thrips can be removed by bathing the plant using insecticidal soap to remove them permanently and stop them from infesting the plant in the long run.
Frequently Asked Questions
The Philodendron Birkin is a low-maintenance, exceptional, and rare houseplant. You can take care of it as an outdoor or an indoor plant. The remarkable thing about this houseplant is found in the color of its leaves which have different variegations.
This plant is easy to maintain, and we must take care of the plant to preserve the beauty that can be found on its leaves.
The Birkin plant is a rare houseplant with variegated colors. The beauty of this houseplant can be found on the leaves, which show the variation of colors.
On rare occasions, the Philodendron Birkin plant’s variegation is not stable, making its leaves change color differently from its mother plant when propagated.
There are instances that the Philodendron will not variegate because of the number of nutrients or needs it accumulates. The lack of sunlight, water, and humidity can affect the plant, explaining why it does not seem variegated.
If the plant lacks sunlight, water, and moisture, this could be why the plant does not produce variegated